MS Angles (equal):
| Size in mm |
Average Weight |
| KG/MTR |
KG/FT |
| 25 x 25 x 3 |
1.10 |
0.30 |
| 25 x 25 x 5 |
1.80 |
0.50 |
| 25 x 25 x 6 |
2.10 |
0.60 |
| 30 x 30 x 3 |
1.40 |
0.40 |
| 35 x 35 x 3 |
1.60 |
0.50 |
| 35 x 35 x 4 |
2.10 |
0.60 |
| 35 x 35 x 5 |
2.60 |
0.80 |
| 37 x 37 x 3 |
1.70 |
0.50 |
| 40 x 40 x 4 |
2.40 |
0.70 |
| 40 x 40 x 5 |
3.00 |
0.90 |
| 40 x 40 x 6 |
3.50 |
1.10 |
| 45 x 45 x 4 |
2.70 |
0.80 |
| 45 x 45 x 5 |
3.40 |
1.00 |
|
|
| Size in mm |
Average Weight |
| KG/MTR |
KG/FT |
| 50 x 50 x 4 |
3.00 |
0.90 |
| 50 x 50 x 5 |
3.80 |
1.20 |
| 50 x 50 x 6 |
4.50 |
1.40 |
| 55 x 55 x 4 |
3.30 |
1.00 |
| 55 x 55 x 5 |
4.10 |
1.30 |
| 60 x 60 x 4 |
3.70 |
1.10 |
| 60 x 60 x 5 |
4.50 |
1.40 |
| 60 x 60 x 6 |
5.40 |
1.64 |
| 65 x 65 x 4 |
4.00 |
1.20 |
| 65 x 65 x 5 |
4.90 |
1.50 |
| 65 x 65 x 6 |
5.80 |
1.80 |
| 65 x 65 x 8 |
7.70 |
2.40 |
| 65 x 65 x 10 |
9.40 |
2.90 |
| 75 x 75 x 5 |
5.70 |
1.70 |
|
|
| Size in mm |
Average Weight |
| KG/MTR |
KG/FT |
| 75 x 75 x 6 |
6.80 |
2.10 |
| 75 x 75 x 8 |
8.90 |
2.70 |
| 75 x 75 x 10 |
11.0 |
3.40 |
| 75 x 75 x 12 |
13.1 |
4.00 |
| 90 x 90 x 6 |
8.20 |
2.50 |
| 90 x 90 x 7 |
9.50 |
2.90 |
| 90 x 90 x 8 |
10.80 |
3.10 |
| 90 x 90 x 10 |
13.40 |
4.10 |
| 100 x 100 x 6 |
9.20 |
2.80 |
| 100 x 100 x7 |
10.7 |
3.30 |
| 100 x 100 x 8 |
12.10 |
3.70 |
| 100 x 100 x 10 |
14.90 |
4.50 |
| 100 x 100 x 12 |
17.70 |
5.40 |
| 110 x 110 x 8 |
13.40 |
4.08 |
| 110 x 110 x10 |
16.50 |
5.03 |
| 110 x 110 x 12 |
19.6 |
5.97 |
| 130 x 130 x 8 |
15.9 |
4.85 |
| 130 x 130 x 10 |
19.7 |
6.01 |
| 130 x 130 x 12 |
23.4 |
7.13 |
|
Rolling Tolerances |
Leg length |
Sectional weight |
Length |
Up to 45 mm : ± 1.5 mm
45 mm to 100 mm : ± 2 mm
above 100 mm : ± 2 %
|
3 mm thickness : ± 5 %
Over 3 mm thickness :+5/-3%
|
For fixed length : ± 100 mm |
|
MS Angles (unequal):
| Size in mm |
Average Weight |
| KG/MTR |
KG/FT |
| 45 x 30 x 4 |
2.23 |
0.68 |
| 45 x 30 x 5 |
2.75 |
0.80 |
|
Chemical compositions & Mechanical properties
The data given above is indicative. Actual weights may vary.
MAHAVIR STEEL INDUSTRIES developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.
|
