Declaration of Performance – DOP-MS-SQ-01 according to Annex III Construction Products Regulation (305/2011/EU) and Regulation (EU) No 574/2014 | ||||
For the construction product | Hot-Rolled Structural Steel | |||
Unique identification code of the product type:: | EN 10025-2:2019 S275J2 | |||
Intended use: | Hot rolled Structural steel Shape for Fabrication construction or engineering purpose. | |||
Manufacturer: | Mahavir Steel Industries Ltd. Gat No.236/1, Pune-Solapur Road, Yawat, Pune-412214 Maharastra India. | |||
Authorized representative: | None | |||
System of AVCP: | System 2+ | |||
Harmonised standard: Notified body: | EN 10025-1:2004 TÜV NORD Systems | |||
Declared performance: | ||||
Essential characteristics | Performance | Harmonised technical specification | ||
Dimensions and shape | Tolerances acc. to Table 1 Confirms to EN 10025-2:2019 ( E ) | EN 10025-1:2004 ( E ) | ||
Mechanical properties | Grade Designation: EN 10025-2:2019 | |||
Yield Strength Mpa | Nominal Thickness mm | Min | Max | |
≤16 | 275 | - | ||
>16 to ≤40 | 265 | - | ||
>40 to ≤63 | 255 | - | ||
>63 to ≤80 | 245 | - | ||
>80 to ≤100 | 235 | - | ||
>100 to ≤150 | 225 | - | ||
Tensile Strength Mpa | Nominal Thickness mm | Min | Max | |
<3 | 430 | 580 | ||
≥3 to ≤100 | 410 | 560 | ||
>100 to ≤150 | 400 | 540 | ||
Percentage Elongation % | Nominal Thickness mm | Min | Max | |
≥3 to ≤40 | 23 | - | ||
>40 to ≤63 | 22 | - | ||
>63 to ≤100 | 21 | - | ||
>100 to ≤150 | 19 | - | ||
Impact Strength | Temp ⁰C | Min Energy (Joules) | ||
-20 | 27 | |||
Weldability | As per TABLE 1 OF EN 10025-2:2019 | |||
Durability | No Determination | |||
The performance of the product identified above is in conformity with the set of declared performance. This Declaration of Performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole responsibility of the manufacturer identified above. Signed for and on behalf of the manufacturer by: PRAKASH BONGARDE (FPC) (Place, Date, Signature): PUNE XX/FEB/2024 |