"Instilling confidence in Steel"
MS Angles
Mahavir Steel supplies a wide range of Mild Steel (MS) Angels. MS Angels are used for manufacturing of truck-trailers, EOT cranes and Gantry, escalators and elevators,ship building, factory sheds, bus body, communication and transmission towers, conveyors, boilers, agricultural equipment, and construction of bridges, scaffolding and many more fabrication and engineering industries.
MS Equal Angles : 25 x 25 x 3mm to 130 x 130 x 12mm
| Size in mm | Average Weight | |
| KG/MTR | KG/FT | |
| 25 x 25 x 3 | 1.10 | 0.30 |
| 25 x 25 x 4.5 | 1.60 | 0.49 |
| 25 x 25 x 5 | 1.80 | 0.50 |
| 25 x 25 x 6 | 2.10 | 0.60 |
| 30 x 30 x 3 | 1.40 | 0.40 |
| 35 x 35 x 3 | 1.60 | 0.50 |
| 35 x 35 x 4 | 2.10 | 0.60 |
| 35 x 35 x 5 | 2.60 | 0.80 |
| 37 x 37 x 3 | 1.70 | 0.50 |
| 40 X 40 X 3 | 1.80 | 0.055 |
| 40 x 40 x 4 | 2.40 | 0.70 |
| 40 x 40 x 5 | 3.00 | 0.90 |
| 40 x 40 x 6 | 3.50 | 1.10 |
| 45 x 45 x 4 | 2.70 | 0.80 |
| 45 x 45 x 5 | 3.40 | 1.00 |
| 45 x 45 x 6 | 4.00 | 1.22 |
| 50 x 50 x 3 | 2.30 | 0.70 |
| 50 x 50 x 4 | 3.00 | 0.90 |
| 50 x 50 x 5 | 3.80 | 1.20 |
| 50 x 50 x 6 | 4.50 | 1.40 |
| 50 x 50 x 8 | 5.84 | 1.78 |
| 55 x 55 x 4 | 3.30 | 1.00 |
| 55 x 55 x 5 | 4.10 | 1.30 |
| 60 x 60 x 4 | 3.70 | 1.10 |
| 60 x 60 x 5 | 4.50 | 1.40 |
| 60 x 60 x 6 | 5.40 | 1.64 |
| 65 x 65 x 4 | 4.00 | 1.20 |
| 65 x 65 x 5 | 4.90 | 1.50 |
| 65 x 65 x 6 | 5.80 | 1.80 |
| 65 x 65 x 8 | 7.70 | 2.40 |
| 65 x 65 x 10 | 9.40 | 2.90 |
| 65 x 65 x 12 | 11.80 | 3.60 |
| 70 x 70 x 7 | 7.38 | 2.25 |
| 75 x 75 x 5 | 5.70 | 1.70 |
| 75 x 75 x 6 | 6.80 | 2.10 |
| 75 x 75 x 8 | 8.90 | 2.70 |
| 75 x 75 x 10 | 11.0 | 3.40 |
| 75 x 75 x 12 | 13.1 | 4.00 |
| 80 x 80 x 6 | 7.20 | 2.19 |
| 80 x 80 x 7 | 7.90 | 2.90 |
| 80 x 80 x 8 | 9.60 | 2.90 |
| 90 x 90 x 6 | 8.20 | 2.50 |
| 90 x 90 x 7 | 9.50 | 2.90 |
| 90 x 90 x 8 | 10.80 | 3.10 |
| 90 x 90 x 10 | 13.40 | 4.10 |
| 98 x 98 x 9.5 | 13.09 | 3.99 |
| 100 x 100 x 6 | 9.20 | 2.80 |
| 100 x 100 x7 | 10.7 | 3.30 |
| 100 x 100 x 8 | 12.10 | 3.70 |
| 100 x 100 x 10 | 14.90 | 4.50 |
| 100 x 100 x 12 | 17.70 | 5.40 |
| 110 x 110 x 8 | 13.40 | 4.08 |
| 110 x 110 x10 | 16.50 | 5.03 |
| 110 x 110 x 12 | 19.6 | 5.97 |
| 130 x 130 x 8 | 15.9 | 4.85 |
| 130 x 130 x 10 | 19.7 | 6.01 |
| 130 x 130 x 12 | 23.4 | 7.13 |
| Size in mm | Average Weight | |
| KG/MTR | KG/FT | |
| 45 x 30 x 4 | 2.23 | 0.68 |
| 45 x 30 x 5 | 2.75 | 0.80 |
Rolling Tolerances |
||||||
|
Chemical compositions & Mechanical properties
The data given above is indicative. Actual weights may vary.
MAHAVIR STEEL INDUSTRIES developes specific sections. Specific sizes in any section can be developed for economical and feasible quantity, in Mild Steel, High Tensile, En 8 / En 8D / EN 9 / EN 16 material.
Any Queries: [email protected]
Copyrights © 2017 All Rights Reserved. Powered by Mahavir Steel Industries LTD